sputtered film meaning in Chinese
溅射薄膜
喷镀薄膜
Examples
- On the basis of uv - vis transmissive spectra , the sputtered films have absorption peaks toward longer wavelength , and the calculation shows the lower optical band gap
适当的掺杂量可以产生新的吸收峰,增加对长波段光的吸收,提高光催化效率。 - Abstract : the main factors including pre - coating ' s qualities and depositing process which affect the appearance , adhesion and thickness of sputtering film have been discussed in this paper
文摘:本文对镀层的外观、镀层的附着力以及镀层的厚度的影响因数包括涂层的质量和镀膜工艺参数进行了分析。 - In order to increase the thickness and improve the quality of sputtered films , low deposition rate and 30nm ta buffer layer on substrate have been adopted . as a result , 3 u m single films and 2 . 6 u m / 2 . 6 u m 72 . 6 u m sandwiched films have been successfully prepared
通过降低溅射速率和在基底上沉积30nm的tabuffer (缓冲层) ，解决了难以溅射生长厚膜的问题，成功制备了厚度3 m的单层膜和每层厚度2 . 6 m的三明治膜。 - The tungsten oxide films with catalyst by two methods were characterized by x - diffractometer , tunnel scan - atomic force microscope , ft - ir , double - beam uv - vis - nir spectrophotometer and speediness volt - ampere cycle meter . as results of x - diffractometer , pt / wo3 sputtered film samples are crystal when annealed at 400 with distinct diffractive acuti - apices
本文分别用x衍射仪、隧道-原子力显微镜、傅立叶变换红外光谱仪、双束紫外可见分光光度计、快速伏安循环法等表征了用以上两种方法制备的三氧化钨掺杂薄膜。